Alonsa

Home | Careers | Sitemap | FAQs | Legal Notice

About Us

Products

Customer Care

Trade Enquiry

Sales Network

Customer Care

Air Conditioner

• Air conditioner should be properly grounded.
• Do not use an extension cord.
• Do not operate air conditioner with front cover removed.
• Do not install air conditioner near a heat source.
• Clean the air filter once in two weeks.
• Do not keep any obstacle in front of air outlet window.
• Back of air conditioner should be open for air ventilation, there should not be any Obstacle at least for 1m.
• Service your air conditioner once in a year or before start of season by qualified Service personnel.
This shall increase the cooling efficiency.
• When the air conditioner is not going to be used for long period of time, switch off the Power from the mains and unplug it.
• Whenever starting the unit, always run the unit in fan mode for sometime. Then change the mode.
• Use curtains or blinds to prevent heat coming into room from sunlight, this shall reduce power consumption.
• Close all doors and windows when unit is under operation, this shall avoid cold air leakage.
• Do not position airflow of air conditioner directly at persons.
• Never allow kids to play near outdoor unit of split air conditioner.
• Recommended length of piping between indoor and outdoor unit is 5meters.
• Water dripping from indoor unit should run from drain hose correctly.
• Place the outdoor unit of split air-conditioned on stable surface, the air flow should be directed outwards.
• In split airconditioner, if the atmosphere in room is humid and damp, then use dry mode for cooling.

Refrigerator

• Always keep a new refrigerator in vertical position for 3 hours, before switching it on.
• Clean the refrigerator with a clean cloth, before storing anything inside.
• In humid condition, there shall be moisture formation on body, which is normal.
• Place the refrigerator in good ventilated place away from heat source or direct sunlight.
• Keep refrigerator in stable ground, to avoid any noise problem or imbalance.
• Frozen food should be kept in freezer chamber.
• Cooked food should be kept in refrigerator only after cooling food to room temperature, Never keep hot food items in refrigerator.
• All food stored in refrigerator should have proper space between them.
• Liquid filled bottles should not be kept in freezer compartment ,it may cause explosion due to Freezing.
• Leafy vegetables should be kept in netted bags to avoid getting spoilt due to moisture.
• Minimize frequency and time of opening of refrigerator door to save power.
• Refrigerator should be defrosted at least twice in a week.
• CFC free gas used in refrigerator is environment friendly gas, which prevents ozone layer depletion.
• Do not use, an extension cord for connecting a refrigerator.
• Avoid keeping fruits and vegetables in front of cold air duct.
• Wrap foods such as fish, meat - to avoid drying and odour mixing.
• Dry fruits can be stored in the freezer compartment shelf.
• Fresh milk can be stored in chiller room.
• Clean evaporation tray above compressor once in six months.
• Keep temperature setting of refrigerator at low during winter. And at high during summer.

Washing Machine

• Keep the machine 5cm away from either side of the wall, avoid high humidity or Direct exposure to sunlight or rain.
• Use water upto 50 deg c.
• Turn garments inside out when washing to avoid piling and lint.
• Soiled garments should be soaked in liquid detergent for about 10mins before washing.
• Colored and dyed fabrics may lose their Colour if washed in bleach.
• Clean the lint filter after every use.
• Use correct quantity of water depending on the quantity of clothes to be washed.
• Drain hose should not be placed at a height.
• Spin lid should not be open, when spin is in process.
• Place the laundry evenly in spin drum for spinning, otherwise it may cause imbalance.
• Remove coins, keys and pull zippers, so as to avoid damage to clothes and machine.
• Put detergent and softener into the detergent drawer just before washing.
• Always do not exceed the maximum loading capacity.

Water Dispenser

• Place the water dispenser in good ventilated place away from heat source or direct sunlight.
• Do not start the power when there is no water in the bottle, otherwise water heater will get burnt.
• Do not use, extension cord for connecting water dispenser.
• Keep the children away from hot water, always switch off hot water when not required,
• Clean hot water and cold water tank periodically, by pouring water in cold water tank and opening the Drain cap.
• Clean excess water formation from refrigerator compartment by a piece of sponge.
• Never lean the machine for more than 45 deg c.
• Keep the refrigerator door always closed.

Televisions

• Never move a TV set while it is working. This can cause some Colour patches on the screen. These patches can be temporary and may vanish after some time. However if it continues then get the unit inspected by a technician.
• Never keep any equipment, which has powerful magnets inside like speakers etc near your TV set. This can also create Colour patches on the screen.

PRODUCT	SYMPTOM	POSSIBLE CAUSES

TV

	No power	The power cord is not connected
		The power button on the main unit is off

	No TV reception	The antenna connector in not connected or wires are broken
		Cables are incorrectly connected to external equipment
		The appropriate color system is not selected

	Noisy picture	The TV is not fined tuned correctly
		The antenna is not adjusted correctly
		Cables are incorrectly connected to external equipment
		Possible station trouble
		Possible local interference

	No remote control operation	The batteries need to be replaced
		Polarities of the batteries are incorrect
		Main power is not ON
		Something may interfere in path of remote sensor

	Normal picture, no sound	Volume must be set to min. press vol + button
		Volume is set to mute, press mute button

	No picture, normal sound	Brightness and contrast may be set to min.

	No color	Select other color system by SYSTEM key.
		Color may be set to min.
		Program may be in black and white.

	Ignition noise	Cause by interference from car ignition or any electrical appliances working

	Ghost picture	Change the direction of antenna

	Snowy picture	Signal may be weak , special antenna need to be installed

	Improper color patch	Turn OFF the TV for 10 mins from mains and switch ON.


RADIO
	Noise or sound distorted	Station not tuned properly
		FM: telescopic antenna is not properly adjusted
		AM: unit is not positioned correctly.

	FM Stereo indicator light not on	Poor FM signal being recd.
		BAND SW is not set to FM STEREO

	Radio no sound	Function switch is not set to radio position
		Volume set at minimum


CASSETTE PLAYER

	No sound	Function switch not set to TAPE.
		Volume is set at minimum

	Distorted sound	Head dirty, clean the head.

	Tape speed slow	Tape is old or worn out
		Batteries are weak
		Tape mechanism belt is loose
		Tape mechanism motor may be defective

	No recording taking place	Erase prevention tab removed from cassette
		MIC defective

	Distorted sound in playback	Tape head to be cleaned
		Recording tape may be dirty.

CD PLAYER
	Vcd/MP3 not playing	Function switch to be set to CD position
		CD is not installed in the set.

	Cd skipping while playing	Scratches on disc
		Clean the head of CD lens

	No sound	Headphone connected to headphones jack ,
		Remove the headphone.


VCD PLAYER
	Vcd dusc doesn't play	The disc is dirty or defective
		Insert the disc with label side up
		The lens of pick up is dirty
		Moisture condensation has occurred on lens
		Press the " PLAY" button

	No picture appears on the tv	Make sure you select the correct video input on the TV
		Make sure the TV is turned on
		Check if the CD is audio CD.
		Connect the video connecting cord correctly

	Picture is distorted	The disc is dirty or defective
		The color system you have selected for this player is
		Not the same as the one that disc is recorded with.
		When you pauses or use search, picture is distorted


DVD PLAYER
	No power	Make sure the power cord is properly connected
	No picture	Check the TV switch is ON.
		Check the video connection
		Select the appropriate video input mode on the TV to
		Receive the DVD signal

	Distorted picture or no color	TV type NTSC/PAL setting done in DVD

	Unable to start the playback	If no disc inserted, insert disc
		Regional code matches with DVD player
		Ensure the disc label is facing up
		Check if the disc is dirty or defective

	Poor picture	Clean the disc with a soft cloth, from center to the edge
		In a straight line.

	No sound	Check the audio connection
		Select the correct input mode of the audio receiver

	No sound for 5.1chanalog)	The setting item 2.1 DOWNMIX set to 5.1 Ch

	No digital audio output	Make sure the setting item 2.2.1 is not off.

	Wired microphone unable to produce	Adjust the microphone volume to a suitable volume
	Voice	Turn on the microphone

	Player does not respond to some	Operations may not be permitted by the disc
	Operating commands

	Player cannot close the tray	Please place disc in the center of the tray

	Player cannot open the tray	If the tray is locked by disc, please use thin stick into
		Emergency opening hole and move the inside bar on
		The bottom of the player manually.


Cordless Telephone
	No power	AC adaptor unplugged or mains power failure
	Two beeps heard when using the	The handset is located beyond the range of base unit
	phone	The handset is not registered
		Move the handset close to base unit

	Phone does't ring when you	Telephone line cord should be firmly connected to
	receive the call	the base unit and telephone jack
		AC adaptor is switch ON.
		the handset must be away from base unit.
		too many extension connected to telephone line.

	Noise during phone conversation	take handset close to base unit
		both antenna are fully extended
		keep the base unit away from PC, video games or
		fax machine.
		press CH ket to switch to another channel

	Low battery indication	recharge the battery

Microwave Ovens

• Keep a peel of lemon in a bowl of water inside your microwave oven and warm for one minute to remove the smell of cooked food.
• Cleaning the insides of the microwave may not be easy. Try to rub the inner surface with some moist baking soda. The dirt and grease will    come off easily. Wipe dry with a clean towel.
• Never use a metal container or a foil or even a steel spoon inside a microwave oven. This will cause a sparking inside the oven, which can    damage the body and the door of the microwave.
• You can use glass, ceramic or certain plastics inside your microwave. However, do not use Melamine plates and vessels as this can get    damaged over a period of time.
• Do not cook eggs in the shell, as they will burst.
• Puncture egg yolks, potatoes, tomatoes and chicken liver before cooking.
• Never operate your oven empty.
• Never use metal pans or dishes with metal handles in the microwave.
• Do not use plates with metal trims.
• Do not use paper or wooden containers, which can burn.

Trouble Shooting

	No Power	Cord is not connected correctly
		House circuit may be tripped off.

	No Microwave power	The timer should be set
		The door is securely closed of oven

	Radio interference in radio & TV	Clean the door and sealing surface of oven
		Place the radio and TV as far as possible from oven

	Lamp is not on, turntable doesn't rotate	Check the fuse,
		Primary and secondary winding of the transformer
		May be short
		The door lock hook must have been broken

	Turntable rotates,but food can't be heated	The filament of transformer are open
		Magnetron filament may be open
		The plugs of magnetron or capacitor may be loose
		High voltage diode may be defective

	Lamp is not on	Lamp is defective or plug loose

	Turntable not rotating	Turntable motor defective
		Connecting shaft weave broken

	Door can't open	Door lock broken
		warpage in door

Blenders

• Cleaning a blender jar after use is not so easy. After pouring out the blended material fill the jar to one-third its capacity with water. Use the pulse or inching function for five seconds. You will find that the jar has been washed clean even under the blades. If the material is very sticky then you can even use soap water instead of plain water.

• The blenders have an overload protection switch. This is to prevent burning of the motor when the blender is loaded above its rated capacity or kept switched on for a longer time. In such a case the circuit breaker switches off the motor. Press the reset switch which is on the top in case of model NB895 and which is at the bottom in case of models like NB894 and NB900 to reset the unit. You can start the unit after waiting for some time to cool the motor and by removing some of the material inside to reduce the load in the jar.

Product

Symptom

Possible Causes

Donut Maker

Doughnut not risen or are not brown at the top

Donut maker not enough, pre heat for 5 mins

Too much milk added

To little batter used

Baking powder not active

Batter over mixed

Doughnuts too brown

Overheating, heat only for two mins.

Doughnuts sticking or difficult to remove

Doughnut plates are dirty, clean them

News & Events

ALONSA in Jebel Ali Free Zone
ALONSA takes part in HK fair 2006 (Autumn Edition)
ALONSA Ramadan Promotion - Performing Dealers
Read All

Like us on

News & Events

ALONSA in Jebel Ali Free Zone ALONSA takes part in HK fair 2006 (Autumn Edition) ALONSA Ramadan Promotion - Performing Dealers Read All

ALONSA in Jebel Ali Free Zone
ALONSA takes part in HK fair 2006 (Autumn Edition)
ALONSA Ramadan Promotion - Performing Dealers
Read All